▒▒▒ Micro materials & joining Laboratory ▒▒


 79, 1/1 회원가입  로그인  
79    Characterization of Ag-Pd Nanocomposite Paste for Electrochemical Migration Resistance    관리자    2013/12/19  2529
78    Rate-Dependent Hysteresis Model for the Structural Steel(SM490) Considering the Coupled Effect of Strain Rate Hardening and Temperature Rise    관리자    2007/08/30  2037
77    Degradation Characteristics and Ni3Sn4 IMC Growth by a Thermal Shock Test in SAC305 Solder Joints of MLCCs Applied in Automotive Electronics    관리자    2016/04/03  1846
76    Reliability Assessment of Lead Free Soldered PWBs    관리자    2007/08/30  1702
75    Comparison of the 60Sn40Pb and 62Sn2Ag36Pb Solders for a PV Ribbon Joint in Photovoltaic Modules Using the Thermal Shock Test    관리자    2017/04/21  1438
74    Reliability Evaluation of QFP Solder Joint Using Sn-8Zn-3Bi Solder Paste during the Thermal Shock Test    관리자    2007/08/30  1285
73    Effect of Surface Treatment on the Mechanical Strength of Ultrasonically Bonded Chip    관리자    2009/08/17  1285
72    Finite Element Modeling of Ultrasonic Chip on Glass (COG) Bonding with Anisotropic Conductive Films (ACFs)    관리자    2008/07/28  1228
71    Characteristics of Sn-2.5Ag Flip Chip Solder Joints under Thermal Shock Test Conditions    관리자    2009/04/17  1196
70    Temperature Rise at Bonding Parts and Bonding Mechanism of Parallel Gap Bonding Method    관리자    2007/04/26  1171
69    Improvement of the Bond Quality and Effect of Bonding Temperature Lowering by Applying the Inserted Metal of Low Melting Point    관리자    2007/04/26  1152
68    미세 전자재료의 접합현상과 프로세스 제어    관리자    2007/04/27  1077
67    Thermosonic Chip on Glass (COG) Bonding with Anisotropic Conductive Films (ACFs)    관리자    2008/07/28  1068
66    Characteristics of Thermosonic Anisotropic Conductive Adhesives (ACFs) Flip-Chip Bonding    관리자    2010/10/22  1060
65    이종 전자재료 Joint 부위의 신뢰성에 관한 연구    관리자    2007/04/27  1049
64    저온접합프로세스에 의한 접합부의 품질향상과 그 접합부의 신뢰성    관리자    2007/04/27  1029
63    Interfacial reaction and joint reliability of fine-pitch flip-chip solder bump using stencil printing method    관리자    2007/08/30  1027
62    Analysis of the Wetting Balance Test Part 1: The Effect of Immersion Depth    관리자    2007/04/27  1016
61    Self-Organized Interconnection Process Using Solderable ACA    관리자    2009/07/04  1009
60    Reliability of Fine-Pitch Flip-Chip (COG) Bonding with Non-Conductive Film Using Ultrasonic Energy    관리자    2011/03/09  1007
59    Reliability of Fine-Pitch Flip-Chip (COG) Bonding with Non-Conductive Film Using Ultrasonic Energy    관리자    2010/08/22  985
58    Joining Phenomena of Different Electronic Meterials in Parallel Gap Resistance Joining Process    관리자    2007/04/27  978
57    도금형성프로세스와 열원형태에 의한 접합성에 관한 검토    관리자    2007/04/27  978
56    Development of a Visual Monitoring System for Deformation Measuring of Welded Members and its Application    관리자    2008/07/28  976
55    Mechanical strength and fracture mode transition of Sn-58Bi epoxy solder joints under high-speed shear test    관리자    2012/01/13  967
54    Three Temperature Model for Nonequilibrium Energy Transfer in Semiconductor Films Irradiated with Short Pulse Lasers    관리자    2007/04/27  945
53    Interfacial Reaction between Sn-58mass%Bi Eutectic Solder and (Cu, Electroless Ni-P /Cu) Substrate    관리자    2007/04/27  924
52    Reliability Properties of Solderable Conductive Adhesives with Low-Melting-Point Alloy Fillers    관리자    2013/01/10  912
51    The behavior of welded joint in steel pipe members under monotonic and cyclic loading    관리자    2007/04/27  893
50    Stress Analysis and Life Improvement of Solder Joint in TSOP with Claded Die Pad    관리자    2007/04/27  887
49    Selection of Proper Fatigue Model for Flip Chip Package Reliability    관리자    2007/04/27  884
48    The Influences of Residual Stress on the Frequence of Ultrasonic Transducers with Composite Membrane Structure    관리자    2007/04/27  884
47    3D High Precise Self-Alignment Process Using Surface Tension of Liquid Resin Material    관리자    2007/04/27  884
46    Investigation on Optical Thickness of Plating Layers and Reliability of Bonds with Low Temperature Bonding Process    관리자    2007/04/27  884
45    A Numerical Study on Nonequilibrium Heat Transfer and Crater Formation in Thin Metal Films Irradiated by Femtosecond Pulse Laser    관리자    2007/08/30  881
44    Weldability Studies on the Replacement Repair Welded Joints of a Damaged Steel Bridge    관리자    2008/07/28  870
43    Reliability Assessment of Lead Free Soldered PWBs    관리자    2008/07/28  870
42    Dynamic Filling Characteristic Capillary Driven Underfill Process in Flip-Chip Packaging    관리자    2012/01/13  869
41    The study on micro soldering using low-residue flux in soldering joint    관리자    2007/04/27  860
40    Characteristics of solderable electrically conductive adhesives (ECAs) for electronic packaging    관리자    2012/01/13  854
39    Aging Characteristic and prediction of thermal fatigue life of lead-free BGA solder joints    관리자    2007/04/27  852
38    An Investigation on Wetting Characteristics of Solder Particle for Solderable Electrically Conductive Adhesives (ECAs)    관리자    2007/08/30  850
37    The Growth Kinetics of Intermetallic Compound Layer at the Interface between Sn-3.5Ag Base Solder and (Cu, Electroless Ni-P/Cu, Immersion Au/Ni-P/Cu) Substrate    관리자    2007/04/27  845
36    Board-level reliability of Pb-free surface mounted assemblies during thermal shock testing    관리자    2007/04/27  844
35    Reliability Evaluation of QFP Solder Joint Using Sn-8Zn-3Bi Solder Paste during the Thermal Shock Test    관리자    2008/07/28  840
34    The Effect of Bi Concentration on Wettability of Cu Substrate by Sn-Bi Solders    관리자    2007/04/27  837
33    An Investigation on Wetting Characteristics of Solder Particle for Solderable Electrically Conductive Adhesives (ECAs)    관리자    2008/07/28  837
32    Fabrication of SiCp/2024 Composite Alloys Using Friction Stir Welding and Its Mechanical Properties    관리자    2015/07/20  836
31    Heat Distribution of Bonding Parts and Bonding Factors in Parallel Gap Bonding Method    관리자    2007/04/26  831
30    Underfilled BGAs for Borard Level Reliability    관리자    2007/04/27  819
29    Dynamic behavior of capillary-driven encapsulation flow characteristics for different injection types in flip chip packaging    관리자    2014/02/21  817
28    A Numerical Study on Nonequilibrium Heat Transfer and Crater Formation in Thin Metal Films Irradiated by Femtosecond Pulse Laser    관리자    2008/07/28  813
27    Effect of Isothermal Aging on Ball Shear Strength on BGA Joints with Sn-3.5Ag-0.75Cu solder    관리자    2007/04/27  810
26    Effect of Plasma Treatment on the Fluxless Soldering of Si-wafer to Glass Substrate    관리자    2007/04/27  807
25    A Study on Fluxless Soldering of Si-Wafer/Glass Substrate Using Sn-3.5mass% Ag and Sn-37mass%Pb Solder    관리자    2007/04/27  802
24    Effect of Viscosity of Liquid Resin on Resin Self-Alignment Capability    관리자    2007/04/27  799
23    Study of Characteristics of Solar Cells through Thermal Shock and High-Temperature and High-Humidity Testing    관리자    2014/02/14  799
22     Stress influences on the ultrasonic transducers    관리자    2007/04/27  795
21    비납솔더를 사용한 미세피치 솔더접합부의 신뢰성에 대한연구    관리자    2007/04/27  785
20    Estimate Optimal Shape of μBGA Solder Joints and Thermal Fatigu Life    관리자    2007/04/27  781
19    전자디바이스의 최근 실장경향과 접합부의 신뢰성 핵심기술    관리자    2007/04/27  771
18    Residual Stress in Fillet Welding of Similar or Dissimilar Steels and Stress under Loads    관리자    2007/04/27  770
17    Thermal Fatigue Life of Underfilled μBGA and Flip Chip Solder Joints    관리자    2007/04/27  768
16    Intermatallic Compound Layer Formation Between Sn-3.5Ag BGA Solder Ball and(Cu, immersion Au/electroless Ni-p/Cu)  Substrate    관리자    2007/04/27  768
15    Study on Reliability of Micro BGA Solder Joints with Lead-free solder Materials    관리자    2007/04/27  763
14    Effects of welding speed and aging heat treatment on the friction stir welded joint of Al-Mg-Si aluminum ally    관리자    2007/04/27  763
13    Effects of friction welding parameters on the mechanical and metallurgical properties of type 5052 Al/SS41 joints    관리자    2007/04/27  757
12    A Study on μBGA Solder Joints Reliability Using Lead-free Solder Materials    관리자    2007/04/27  753
11    Flip chip bumping by electroless Ni    관리자    2007/04/27  750
10    Dynamic modeling for resin self-alignment mechanism    관리자    2007/04/27  749
9    Reliability and Optimal Shape Prediction of μBGA    관리자    2007/04/27  749
8    Prediction of Thermal Fatigue Life of Lead-Free BGA Solder Joints by Finite Element Analysis    관리자    2007/04/27  734
7    Development of Visual Monitoring System for Deformation Measuring of Welded Members and Its Application    관리자    2007/08/30  727
6    Bonding Characteristics of Underfilled Ball Grid Array Packaging    관리자    2015/07/14  723
5    Evaluation of the Characteristics of 305SAC Lead-Free Solder Joints between a Chip Electrode and a Cu-Pad in Automotive Electronics    관리자    2015/11/06  678
4    Research on the Power Drop of Photovoltaic Module’s Aging Through the Thermal Shock Test    관리자    2015/11/06  657
3    An investigation of the reliability of solderable ICA with low-melting-point alloy (LMPA) filler    관리자    2015/01/12  640
2    Ball Grid Array Interconnection Properties of Solderable Polymer–Solder Composites With Low-Melting-Point Alloy Fillers    관리자    2017/12/07  173
1    Influence of multi-walled carbon nanotube (MWCNT) concentration on the thermo-mechanical reliability properties of solderable anisotropic conductive adhesives (SACAs)    관리자    2018/11/01  7
1
Copyright 1999-2018 Zeroboard / skin by kidd^^